A1Armory AR15 Reduced Power Trigger Kit
Mil-spec AR-15 triggers typically have an 8 to 9 pound trigger pull with factory springs. Utilizing A1Armory's Reduced Power Trigger Spring Kit should achieve a trigger pull reduction of 2 to 4 pounds. A 5 to 6 pound trigger pull is typical after installation of the Reduced Power Spring Kit.
(1) 25% Reduced Power Trigger Spring
(1) Standard Hammer Spring
(1) 50% Disconnector Spring
The reduced power springs are designed to reduce trigger pull weight in Single Stage triggers. Due to the magnitude of triggers on the market, we can not guarantee that ALL triggers will adequately detonate ALL cartridges. We recommend high quality brass cased ammunition loaded with commercial primers for the best results. Installation should be performed or overseen by a competent gunsmith.
We do not include a reduced power hammer spring, these springs combined with the others can cause ignition issues in alot of cases. Majority of the time this kit should work just fine for a lighter trigger pull.
For Use With: COLT AR15/M16/M4/CAR15 RP TRIGGER SPRING PK/10